Plastering Mortars

iPlast MS

High Quality, cement-based plaster suitable both spray and manual application.

Product Description

iPlast MS is a cement-based, powdered plastering mortar, made with high-strength hydraulic binders, carefully selected fillers, and special additives. It only needs water added on-site for preparation. Designed to outperform traditional sand-cement plasters, iPlast MS can be applied both manually and with spray machines, offering enhanced productivity and adhesion. Its application results in a smooth surface, making it an optimal base for putty.

Advantage

Easy Preparation
High Productivity
Superior Adhesion
Smooth Finish
High Quality Composition
Consistent Mix
Improved Workability
Optimal Setting Time

Applications

Apply iPlast MS to the prepped surface promptly while the mortar remains fresh and workable. If there’s a delay, do not add more water; instead, remix until it regains workability.
Use spraying or conventional hand application techniques as suited to the project needs.
To build thickness, apply in layers of 15 – 20 mm until the desired level is achieved.

Data Sheet

iScratch

High Quality, Polymer modified cementitious Scratch Coat Coat

Product Description

iScratch is a powdered cement-based scratch coat that consists of high-strength hydraulic binders, carefully selected graded fillers, special additives, and polymers (bonding agent). It only requires the addition of water on-site.

iScratch is specifically formulated for use on blocks, block walls, fair-faced concrete, and precast concrete surfaces prior to plaster application.

iScratch can be applied using a spray machine or by manual application.

Advantage

Easy Application
Strong Bonding
High Strength
High Productivity
Cost-Effective
Uniform Mix

Mixing & Application

Add 11.5 – 13.5 liters of fresh, cool, clean water into a deep container.
Gradually add the contents of the 50kg bag to the container.
Use a hand drill equipped with a mixing blade or a high stationary mixer to mix until the mixture is uniform and free of lumps.
Let the mixture sit for 3-4 minutes, then remix.
For smaller amounts, mix manually with a trowel or other suitable hand tools.
Spatter Dash G should be applied immediately to the surface to be plastered, ensuring the mortar is fresh and workable.
If there is a delay in application, do not add more water. Instead, remix until the mortar is workable again.

Data Sheet

Tile Adhesives & Tile Grouts

Grouts & Micro Concrete